
Menu
Menu
The MS-80SH pyranometer is EKO Instruments’ most advanced Class A solar irradiance sensor, engineered for precision, durability, and long-term field stability. As part of the S-Series family, it delivers ISO 9060:2018 Class A, spectrally flat, and fast-response performance — ideal for PV monitoring, solar resource assessment, and research applications.
Building on the industry-defining MS-80, the MS-80SH adds Modbus 485 RTU and SDI-12 digital outputs, improving compatibility with modern data loggers and SCADA systems. It features an integrated low-power dome heater (<1.4 W) to prevent dew and frost, enabling consistent data capture in all weather conditions.
The MS-80SH also includes internal diagnostics for temperature, humidity, tilt, and roll — reducing the need for manual inspections and ensuring system integrity in remote or hard-to-access locations. With the lowest zero offset A (<1 W/m²) and <0.5% long-term non-stability, it sets a benchmark for accuracy and reliability.
Every unit is factory calibrated at EKO’s ISO 17025-accredited facility and comes with a 5-year warranty and 5-year recommended recalibration interval, delivering best-in-class value and the lowest total cost of ownership among Class A pyranometers.
<1.4 W Integrated High-Efficiency Dome Heater for dew & frost resistance
ISO 9060:2018 Class A, Spectrally Flat & Fast Response
<0.5 s Response Time for accurate irradiance capture
<1 W/m² Zero Offset A – one of the lowest in the industry
<0.5% Non-Stability over 5 Years
Internal Diagnostics: Tilt, Roll, Temperature, and Humidity
Surge Protection with Level A EMI/EMC Filter
5-Year Warranty & 5-Year Recalibration Interval
ISO 17025 Accredited Calibration
ISO 9060:2018 | |
---|---|
Response time 95% | < 0.5 Sec |
Zero offset A – Thermal Radiation (200W/m²) | |
Zero offset B – Temperature change (5K/hr) | |
Zero offset C – Total zero off-set | |
Non-stability (change/year) | |
Non-linearity (100 to 1000W/m²) | |
Directional Response (at 1000W/m² | 0 to 80°) | |
Spectral Error | |
Temperature response (-20°C to 50°C) | |
Tilt Response (0-90° | 1000W/m²) | |
Additional Signal Processing Error | < 1 W/m² |
Technical Features : | |
Wavelength Range | 285 to 3000 nm |
Irradiance range (W/m²) | |
Signal Output | |
Sensor Diagnostic | |
Operating temperature | |
Supply voltage | |
Power Consumption | |
Ingress protection | IP67 |
Calibration traceability / uncertainty | |
Standard Cable Length |