Added to list
There are no items on the list.
How it works
HC-10
Thermal Analysis Instruments
Quick λ Thermal Conductivity Tester
The HC-10 Quick λ Thermal Conductivity Tester is super fast, reliable, and portable, designed to measure the thermal conductivity of a wide range of homogeneous samples and vacuum insulator panels (VIP) in just 60 seconds.
HC-10
HC-10 Quick λ Thermal Conductivity Tester is superfast, reliable, and portable, designed to measure the thermal conductivity of a wide range of homogeneous samples and vacuum insulator panels (VIP) in just 60 seconds.
It works by measuring heat loss at the surface layer against a standard reference sample with a known thermal conductivity value, or one measured by another thermal conductivity measuring device. By comparing the calibration curve based on the reference sample and the output value from the sensor, the HC-10 achieves unprecedented measurement results and repeatability.
With most thermal conductivity testers taking more than 1 hour to measure a sample, the HC-10 drastically shortens the testing and production time of VIP. It’s a straightforward, but powerful tool in the lab, adding speed and accuracy to research and development.
Key Features:
- Compact, portable design with integrated temperature sensor & heater
- Designed to measure a wide range of homogeneous & VIP materials
- 60s Super-fast Thermal Conductivity Measurements
- PC software for operation, calibration, and data management
Resources
Documentation
Software
Accessories
Frequently Paired Together
| ISO 9060:2018 | Class B |
|---|---|
| Response time 95% | <18 Sec |
| Zero offset A – Thermal Radiation (200W/m²) | ± 5W/m² |
| Zero offset B – Temperature change (5K/hr) | ± 2 W/m² |
| Zero offset C – Complete Zero off-set | ± 7 W/m² |
| Non-stability (change/year) | < 1.5% |
| Non-linearity (100 to 1000W/m²) | ± 1% |
| Directional Response (at 1000W/m² | 0 to 80°) | ± 18W/m² |
| Spectral Error | ± 0.2% (Spectral selectivity ± 3%) |
| Temperature response (-20°C to 50°C) | ± 2% |
| Tilt Response (0-90° | 1000W/m²) | ± 1% |
| Additional Signal Processing Error | < 1W/m² |
| Technical Features : | |
| Wavelength Range | 285 to 3000 nm |
| Irradiance range (W/m²) | 0 to 2000 |
| Signal Output | MODBUS 485 RTU, SDI-12, 4-20mA, configurable 0-10mA / 0-1V* |
| Sensor Diagnostic | Relative Humidity ± 2% Temp. ± 0.1% / Tilt Angle ± 1° |
| Operating temperature | -40 to 80°C |
| Supply voltage | 5 to 30 VDC |
| Power Consumption | < 0.2 W |
| Ingress protection | IP67 |
| Standard Cable Length | 10m (Optional lengths 20m, 30m, 50m) |