MS-40

Pyranometer

ISO 9060:2018 Class C
The MS-40 is an ISO 9060:2018 Class C pyranometer, and the most cost-effective irradiance sensor for agro-meteorological networks and professional small-scale PV sites where solar radiation is taken seriously.

MS-40

The MS-40 is an ISO 9060:2018 Class C pyranometer based on EKO’s universal sensor platform. It is the most cost-effective irradiance sensor to measure Solar irradiance across the entire solar spectrum and is designed for agro-meteorological networks and professional small scale PV sites.

Featuring an analog (mV) output, every MS and S-Series Pyranometer, including the MS-40, is compatible with the optional MV-01 ventilator & heater and albedo mounting kit and is manufactured with strict quality controls and performance standards.

EKO provides a unique calibration compliant with the international standards defined by ISO 17025 and IEC 9847.

The sensor also has a 5-year warranty with a two year recommended recalibration interval and no requirement to change the desiccant.

 

Key Features:

  • Spectrally flat
  • Analog output
  • ISO 17025 certified calibration
  • 5 year warranty
  • Optional MV-01 Ventilator & Heater

Compare

ISO 9060:2018

Response time 95%

< 18 Sec

Zero offset A – Thermal Radiation (200W/m²)

Zero offset B – Temperature change (5K/hr)

Zero offset C – Total zero off-set

Non-stability (change/year)

Non-linearity (100 to 1000W/m²)

Directional Response (at 1000W/m² | 0 to 80°)

Spectral Error

Temperature response (-20°C to 50°C)

Tilt Response (0-90° | 1000W/m²)

Additional Signal Processing Error

N/A

Technical Features :
Wavelength Range

285 to 3000 nm

Irradiance range (W/m²)

Signal Output

Sensor Diagnostic

Operating temperature

Supply voltage

Power Consumption

Ingress protection

IP67

Calibration traceability / uncertainty

Standard Cable Length

arrow-bottom-icon
icon-done
Added to list
There are no items on the list.
Chat with
EKO-Bot
Powered by ChatGPT
EKO-Bot
April 27, 2025 Hi, I am EKO-Bot, how can I assist you today?
Talk to support