Added to list
There are no items on the list.
How it works
Menu
Menu
MS-80SH
Pyranometer
Class A + Integrated Dome Heating + Spectrally Flat & Fast Response
With integrated high-efficiency dome heating, the MS-80SH is the new standout choice for value, accuracy, speed, reliability and IEC 61724-1:2021 Class A monitoring.
MS-80SH
The MS-80SH pyranometer is EKO Instruments’ most advanced Class A solar irradiance sensor, engineered for precision, durability, and long-term field stability. As part of the S-Series family, it delivers ISO 9060:2018 Class A, spectrally flat, and fast-response performance — ideal for PV monitoring, solar resource assessment, and research applications.
Building on the industry-defining MS-80, the MS-80SH adds Modbus 485 RTU and SDI-12 digital outputs, improving compatibility with modern data loggers and SCADA systems. It features an integrated low-power dome heater (<1.4 W) to prevent dew and frost, enabling consistent data capture in all weather conditions.
The MS-80SH also includes internal diagnostics for temperature, humidity, tilt, and roll — reducing the need for manual inspections and ensuring system integrity in remote or hard-to-access locations. With the lowest zero offset A (<1 W/m²) and <0.5% long-term non-stability, it sets a benchmark for accuracy and reliability.
Every unit is factory calibrated at EKO’s ISO 17025-accredited facility and comes with a 5-year warranty and 5-year recommended recalibration interval, delivering best-in-class value and the lowest total cost of ownership among Class A pyranometers.
Key Features:
- <1.4 W Integrated High-Efficiency Dome Heater for dew & frost resistance
- ISO 9060:2018 Class A, Spectrally Flat & Fast Response
- <0.5 s Response Time for accurate irradiance capture
- <1 W/m² Zero Offset A – one of the lowest in the industry
- <0.5% Non-Stability over 5 Years
- Internal Diagnostics: Tilt, Roll, Temperature, and Humidity
- Surge Protection with Level A EMI/EMC Filter
- 5-Year Warranty & 5-Year Recalibration Interval
- ISO 17025 Accredited Calibration
Resources
3d Files
Software
Accessories
Frequently Paired Together
| ISO 9060:2018 | |
|---|---|
| Response time 95% | < 0.5 Sec |
| Zero offset A – Thermal Radiation (200W/m²) | |
| Zero offset B – Temperature change (5K/hr) | |
| Zero offset C – Total zero off-set | |
| Non-stability (change/year) | |
| Non-linearity (100 to 1000W/m²) | |
| Directional Response (at 1000W/m² | 0 to 80°) | |
| Spectral Error | |
| Temperature response (-20°C to 50°C) | |
| Tilt Response (0-90° | 1000W/m²) | |
| Additional Signal Processing Error | < 1 W/m² |
| Technical Features : | |
| Wavelength Range | 285 to 3000 nm |
| Irradiance range (W/m²) | |
| Signal Output | |
| Sensor Diagnostic | |
| Operating temperature | |
| Supply voltage | |
| Power Consumption | |
| Ingress protection | IP67 |
| Calibration traceability / uncertainty | |
| Standard Cable Length | |
