MS-80S Pyranometer
- ISO 9060:2018 Class A
- Spectrally Flat & Fast Response
Features
- <0.5s Super-Fast response for always accurate measurements
- <1W/m² Record Lowest Zero Offset A, and <0.5% Lowest Non-Stability over 5-Years
- Unbeatable reliability, with a 5 Year Warranty & Recommended Recalibration Interval
- Level A EMI/EMC Electronics Surge Filter & Protection
- Internal Diagnostics for temperature, tilt, roll, and relative humidity
- Smart 4-channel Analog & Digital Interface
- Optional MV-01 Ventilator & Heater
MS-80S Pyranometer
- ISO 9060:2018 Class A
- Spectrally Flat & Fast Response
The elite MS-80S Class A pyranometer includes a state-of-the-art thermopile sensor, and new 'S-Series' internal diagnostics system, and 4-channel smart interface.
Features
- <0.5s Super-Fast response for always accurate measurements
- <1W/m² Record Lowest Zero Offset A, and <0.5% Lowest Non-Stability over 5-Years
- Unbeatable reliability, with a 5 Year Warranty & Recommended Recalibration Interval
- Level A EMI/EMC Electronics Surge Filter & Protection
- Internal Diagnostics for temperature, tilt, roll, and relative humidity
- Smart 4-channel Analog & Digital Interface
- Optional MV-01 Ventilator & Heater
Overview
The MS-80S is an ISO 9060:2018 Class A pyranometer, in the top tier ‘fast-response’ and ‘spectrally flat’ sub-categories, with unprecedented low zero-offset behaviour, fast sensor response, ISO 17025 accredited calibration and a 5-year recalibration interval.
Building on the innovative patented design of the original MS-80, released in 2016, the MS-80S includes a state-of-the-art thermopile sensor, a new internal diagnostics system, and 4-channel smart interface.
The internal diagnostics system offers users visibility over internal temperature, humidity, tilt and roll angle; helping to ensure optimum performance without the need for regular physical checks; while the 4-channel smart signal transducer allows the MS-80S to easily connect to any analogue or digital measuring system, giving users a choice with Modbus 485 RTU for digital output; alongside 4-20mA, and 0-10mA (0-1V) analogue options.
Specifications
| Attribute | MS-80S | View Product | |
|---|---|---|---|
| ISO 9060:2018 | Class A | ||
| Response time 95% | < 0.5 Sec | ||
| Zero offset A - Thermal Radiation (200W/m²) | ± 1W/m² | ||
| Zero offset B - Temperature change (5K/hr) | ± 1W/m² | ||
| Zero offset C - Total zero off-set | ± 2W/m² | ||
| Non-stability (change/year) | < 0.5%/5 years | ||
| Non-linearity (100 to 1000W/m²) | ± 0.2% | ||
| Directional Response (at 1000W/m² | 0 to 80°) | ± 10W/m² | ||
| Spectral Error | ± 0.2% | ||
| Temperature Response (-20°C to 50°C) | ± 0.5% | ||
| Tilt Response (0-90° | 1000W/m²) | ± 0.2% | ||
| Additional Signal Processing Error | < 1 W/m² | ||
| Technical Features | |||
| Wavelength Range (nm) | 285 to 3000 | ||
| Irradiance range (W/m²) | 0 to 4000 | ||
| Signal Output | Modbus 485 RTU / 4-20mA / 0-1V | ||
| Sensor Diagnostic | Relative Humidity ± 2% Temp. ± 0.1% / Tilt Angle ± 1° | ||
| Operating temperature | -40 to 80°C | ||
| Supply voltage | 5 to 30 VDC | ||
| Power Consumption | < 0.2 W | ||
| Ingress Protection | IP 67 | ||
| Calibration traceability / uncertainty | ISO 17025 / WRR / < 0.7% (k = 1.96) | ||
| Standard Cable Length | 10m (Optional lengths 20m, 30m, 50m) | ||
Videos
Downloads
Trouble with Hibi?
Please select Hibi v1.1.24.0 from Downloads for any MS-80S model with a Serial Number higher than S21024001.
For models with a lower number, please download Hibi v1.1.14.0 using the link below.
Frequently paired together
Add all to list
Related Products & Accessories
-
Add to listMS-80SH Pyranometer
Class A + Integrated Dome Heating
The MS-80SH adds integrated solid-state dome heating to the already industry-leading features and ch…
-
Add to listMS-Albedo Kit
MS & S-Series Compatible
The MS-Albedo kit is designed to accommodate x2 pyranometers for albedo or reflected irradiance meas…
-
Add to listRSR-01 Shading Ring
Simple, Smart & Cost-Efficient
Get all-environment diffuse radiation measurements virtually anywhere on earth with the RSR-01 Shadi…
-
Add to listMV-01 Ventilator & Heater
Designed for IEC61724-1 Compliance
Ensure IEC 61724-1 compliance with the MV-01 Ventilator & Heater, compatible with all MS & S-Series…
-
Add to listMS-Albedo MV Kit
MS & S-Series Compatible
The MS-Albedo MV Kit is designed for x2 pyranometers mounted on MV-01 ventilator and heater units, e…
-
Add to listMS-Albedo x4 Kit
MS & S-Series Compatible
The MS-Albedo x4 Kit supports x4 component net-radiation measurements, with pyranometers and pyrgeom…
-
Add to listSTR-21G-S1
With Harmonic Drive®
High-precision solar radiation measurement with industry-leading accuracy, reliability and value for…
-
Add to listMS-80S Albedometer
ISO 9060:2018 Class A
The Class A solution for solar power plants with bi-facial PV modules, outdoor material testing, and…
-
Add to listMS-90 Plus+
A New Angle on Accuracy
The MS-90 Plus+ combines the build quality and accuracy of different EKO sensors into one compact an…
-
Add to listMS-60S Pyranometer
ISO 9060:2018 Class B
The S-Series MS-60S pyranometer is designed for agricultural research, meteorological applications,…
-
Add to listMS-40S Pyranometer
ISO 9060:2018 Class C
A Class C leading S-Series pyranometer for system integrators, agrometeorological networks, and prof…
-
Add to listMS-80 Pyranometer
ISO 9060:2018 Class A
The original ISO 9060:2018 Class A leader and IEC 61724-1 compliant go-to option for photovoltaic sy…
How it works
- Confirm your selection and click on the 'Request a quote' button.
- Fill in the form & hit send.
- Your list and your contact details will be sent to your local EKO office.
- Our team will get back to you as soon as possible with more information or to set up a call or meeting.
